BVYWN - GLOSS LUXURY WOOD FINISH, 140
- MSDS: BVYWN
- Manufacturer: EVR GARD COATINGS CO
- Product Name: GLOSS LUXURY WOOD FINISH, 140
- National Stock Number: 8010-00N054889
Product Identification
Product ID:GLOSS LUXURY WOOD FINISH, 140
MSDS Date:03/01/1991
FSC:8010
NIIN:00N054889
MSDS Number: BVYWN
Responsible Party
PARAMOUNT, CA 90723
US
Emergency Phone: 310-531-0131
Info Phone: 310-531-0131
Cage: 5G582
Contractor
Telephone: 310-531-0131
Cage: 5G582
Ingredients
KEROSENE (PETROLEUM), HYDROTREATED; (PETROLEUM
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 33.29%
OSHA PEL 125 PPM (MFR)
ACGIH TLV: 125 PPM (MFR)
26.0 @100F
CAS: 64742-89-8
Fraction By Weight: 26.46%
OSHA PEL 300 PPM (MFR)
ACGIH TLV: 300 PPM (MFR)
4.28 LB/GL (513 G/L)
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:IRRIT OF NOSE, THROAT &
EYES, DIZZ, WEAK, FATG, ANUS, HDCH. SYMP DISAPPEAR WHEN EXPOS
CEASES. EYE/SKIN CONT MAY CAUSE IRRIT. EYE EXPOS:FLUSH W/PLENTY OF
WATER FOR 15 MINS. CHRONIC:RPTS HAV E SHOWN THAT RPTD & PRLNGD
OCCUP OVEREXPOS TO SOLV CAN CAUSE PERM BRAIN DMG & NERV SYS DMG.
(EFFECTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:SYM OF OVEREXP:INHAL:EXCESSIVE INHAL
OF VAP MAY RSLT IN DIZZ & HDCH. UNCON IN EXTREME CASES. SKIN & EYE:
IRRITANT. SKIN ABSORP:IRRITANT. AFFECTED AREA WILL SHOW SIGNS OF
REDNESS & RASH IF NOT WASHED W/SOAP WATER IMMED. APPLY LOTION/OIL
TO AFFECTED AREA AFTER THORO WASHING. INGEST:IRRIT OF RESP TRACT
(SUPDAT)
Medical Cond Aggravated by Exposure:PROLONGED OR REPEATED CONTACT MAY
CAUSE DERMATITIS.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. EYE:FLUSH W/ PLENTY OF WATER FOR
AT LEAST 15 MINUTES. SKIN:REMOVE SOAKED CLTHG & WASH W/ SOAPY WATER
THORO. INGEST:IF SWALLOWED, DO NOT INDUCE VOMITING. CALL PHYSICIAN
IMMED IATELY.
Fire Fighting
Flash Point:55.0F,12.8C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
FIGHT AS VOLAT LIQ FIRE. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. KEEP AWAY FROM AREAS (SUPDAT)
Unusual Fire/Explosion Hazard:AVOID APPLIC IN AREAS OF PILOT LIGHTS,
SPARKS/OTHER IGNIT SOURCES AS VAP MAY ACCUM ON FLOOR & IGNITE. KEEP
CNTNRS CLSD TIGHTLY & STORE IN COOL PLACE (SUPDAT)
Accidental Release
Spill Release Procedures:ABSORB SPILLED MATERIAL WITH ABSORBENTS, SUCH
AS SAWDUST, CLAYS, ETC, AND FLUSH SPILL AREA WITH LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME OR
SOURCES OF IGNITION. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF
FIRE, REMOVE CLSD CNTNRS FROM AREAS EXPOS TO FIRE.
Other Precautions:EMTPY CNTNRS USUALLY STILL HOLD RESIDUES OF MATL &
VAPORS. THESE MUST BE CONSIDERED HAZARDOUS & DISPOSED OF IN
ACCORDANCE WITH PROPER HANDLING PROCEDURES PRESCRIBED FOR HAZARDOUS
CHEMICALS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD RESP IS REC WHEN USING
SOLV BASED COATINGS. WHEN LEV OF SOLV VAP IS NOT KNOWN/EXCEEDS LEV
@ WHICH REGULAR RESP ARE EFTIVE, USE NIOSH/MSHA APPRVD RESP SUCH AS
TC-19C-NIOSH- MSHA I S HIGHLY RECOMMENDED.
Ventilation:BE SURE TO PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL
TIMES. SERIOUS HLTH PROBLEMS COULD RSLT FROM RPTD & (SUPDAT)
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:AVOID PRLNGD CONT OVEREXPOS. PROVIDE ADEQ
VENT AT ALL TIME WHEN APPLYING THIS PROD.
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED
WHEN HANDLING THIS PRODUCT & ALL CHEMICALS.
Supplemental Safety and Health
FIRE FIGHT PROC:EXPOS TO FIRE. EXPLO HAZ: WHEN NOT IN USE. EFTS OF
OVEREXP:CHARACTERIZED BY HDCH, DIZZ, STAGG, CONFUSN & UNCON & COMA
IN EXTREME CASES. VENT:PROLONGED EXPOSURE.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>168F,>76C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.9 (H20=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:TRANSLUCENT FINISH - PAINT THINNER ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/ALKALIS. LONG TERM CONTACT WITH WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS/OTHER HIGH
TEMP SOURCES WHICH INDUCE THERMAL DECOMP & FIRE.
Hazardous Decomposition Products:THERMAL DECOMP MAY YIELD CARBON
DIOXIDE AND/ OR CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CNTNRS & DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.